Session 1:  Standard Modeling  (Course ID:  AM1018310968970).

Zip file that contains assets for Session 1 can be found here:  01_Standard Modeling

Recording of session 1 can be found here:  http://thinkedu.com/video/FusionTTTSession1.mp4

If you have any questions, please contact Steve Olson at:  fusion360@mesa-cad.com

Please complete a course evaluation.  Once you have completed watching the Recording (or live version) of Session 1, please follow the following steps.

• If you have not already so, please go to this website to set up an Autodesk profile for course evaluations:    http://education.autodesk.com/register (you only have to do this once for all Autodesk courses you may attend).   Click the verification link in the email from Autodesk to verify and return to your account.
• From the left navigation bar, select “Search Course” and enter AM1018310968969 and register/enroll.
• After the course, you can log into http://education.autodesk.com/login-student and complete the short evaluation by clicking the link located on the right side of the course details.
• This is also the place where you can always print out your course completion.

After completing a course evaluation you will be entered in a drawing to win a FREE Microsoft Surface or Apple MacBook Air.  The drawing will be pulled after the 8th session.  Be sure to complete an evaluation/survey after each session to increase your odds of winning a computer.  The course ID will change after each session.

Session 2:  (Course ID:  AM1018310968970).

Zip File that contains the assets for Session 2 can be found here:  02_Sheet Metal Modeling

Recording of session 2 can be found here:  Session 2:  Sheet Metal Modeling.

Once you have completed viewing Session 2, Please complete a short survey/evaluation form.  You can go here to see an article on to do this (with screen shots).

Session 3:  (Course ID:  AM1018310968972).

The recording for session 3 can be found here.

• After the course, you can log into http://education.autodesk.com/login-student
• From the left navigation bar, select “Search Course” and enter AM1018310968972 and register/enroll.
• Then complete the short evaluation by clicking the link located on the right side of the course details.
• This is also the place where you can always print out your course completion.

Session 4:  (Course ID:  AM1018310968973).

Assemblies Exercises can be found here.  Assembly Exercise Files

The PowerPoint for session 4 can be found here:  04_Assemblies

The recording for Session 4 Can be found HERE.

• After the course, you can log into http://education.autodesk.com/login-student
• From the left navigation bar, select “Search Course” and enter AM1018310968973 and register/enroll.
• Then complete the short evaluation by clicking the link located on the right side of the course details.
• This is also the place where you can always print out your course completion.

Session 5:  (Course ID:  AM1018310968976).

Topic:  Materials, Appearances, and Rendering

Once a design is complete, users want to add realism to the model, by assigning materials and adding realistic colors and textures to the model.  Join us for this online training session, where Steve Olson will demonstrate how to use Fusion 360’s Material and Appearance libraries to add realism to models.  After that he will also lead you through rendering images and animations of the design.

The Examples and PowerPoint uses in the session can be found here:  05_Materials, Appearances, and Rendering

A recording of the session, can be found here.

• After the course, please can log into http://education.autodesk.com/login-student
• From the left navigation bar, select “Search Course” and enter AM1018310968976 and register/enroll.
• Then complete the short evaluation by clicking the link located on the right side of the course details.
• This is also the place where you can always print out your course completion.

Session #6:  Topic:  2D Documentation  (Course ID:  AM1018310968977).

The Examples and PowerPoint uses in the session can be found here:  06_2D Documentation

A recording of the session can be found HERE.

• After the course, please can log into http://education.autodesk.com/login-student
• From the left navigation bar, select “Search Course” and enter AM1018310968977 and register/enroll.
• Then complete the short evaluation by clicking the link located on the right side of the course details.
• This is also the place where you can always print out your course completion.

Session #7:  Topic:  CAM Environment  (Course ID:  AM1018310968979).

The Examples and PowerPoint uses in the session can be found here:  07 CAM Documentation

A recording of the session can be found here following the live session.

• After the course, please can log into http://education.autodesk.com/login-student
• From the left navigation bar, select “Search Course” and enter AM1018310968979 and register/enroll.
• Then complete the short evaluation by clicking the link located on the right side of the course details.
• This is also the place where you can always print out your course completion.

Questions?  fusion360@mesa-cad.com  or mkirk@thinkedu.com

Description of the entire series can be found HERE.

The post Fusion 360 for Educators – 8-Part Series appeared first on ThinkEDU Corporate WebSite.

Microsoft Word – 2018 F1iS U.S. National Championships Official Program_DRAFT_6.2.17B[4].docx

The post F1iS 2018 USA Championships appeared first on ThinkEDU Corporate WebSite.

Session Recording Click Here.

PowerPoint Deck:

VEX Introduction Students Pt. 1 KOP Data and assemblies

Help us evaluate this presentation.

AM1015554641– to take a brief course evaluation survey.  Thanks!

Session 2:

PowerPoint Deck – VEX Introduction Students Pt. 2 Direct modeling

Session Recording:  https://recordings.join.me/MEsrJLSo90-AZAcELZwCBw

AM1015555988– to take a brief course evaluation survey.  Thanks!

The post Fusion 360 | VEX Webinars for Students appeared first on ThinkEDU Corporate WebSite.

Recording:  https://recordings.join.me/lh7ShVaUl0e-Ho72hy5U0g

PowerPoint Deck:  VEX Introduction to Fusion360 Pt. 1

Help us evaluate this presentation.

AM1015554316 – to take a brief course evaluation survey.  Thanks!

Session 2:

PowerPoint Deck:  VEX Introduction Faculty Pt. 2 KOP Data and assemblies

Recording:  https://recordings.join.me/M_s71F-8Q0SvU-ydengqiA

Help us evaluate this presentation.

The post FUSION 360 | VEX WEBINARS FOR TEACHERS & COACHES appeared first on ThinkEDU Corporate WebSite.

While having Fusion 360 installed while participating in the webinar series is not mandatory, if you do, you are more than welcome to follow along with the instructor while using the program.  Commercial customers can go here to download a free 30 day trial of Fusion 360.    Students or Educators can get Fusion free for 3 -years.

Session One (1):  

Session files can be found here:

Fusion 360 One Hour Sessions Session 1

External Files Session 1

The recording for Session one which took place on January 31st, 2018 can be found here. 

_________________________________

Session Two (2):

Here is the second session PowerPoint and Exercise PDF.

The Power Point will be displayed in the video.

The PDF can be used for the exercises, while watching the video.  You can go at your own pace and repeat the process if needed.

Fusion 360 One Hour Sessions Session 2

Fusion 360 Session Two

________________________________

A recording to Session Two, which took place on February 14, 2018 can be found here.

Session Three (3)

Here is the second session PowerPoint and Exercise PDF.

Fusion 360 One Hour Sessions Session 3

Fusion 360 Session 3 PowerPoint

A recording to Session Three, which took place on February 21, 2018 can be found here.

________________________________

Session Four (4)

Here is the second session decal, Exercise PDF, and PowerPoint.

Fusion 360 One Hour Sessions Session 4

Fusion 360 Session Four

A recording to Session Four, which took place on March 7, 2018, can be found here.

The post Introduction to Fusion – Course Portfolio appeared first on ThinkEDU Corporate WebSite.